Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Citrus Heights
When a gate in Citrus Heights stops opening, drags against the concrete, or leaves your property unsecured, you need a technician who already knows this area’s housing stock. Most calls we roll on in Citrus Heights involve gates hung decades ago on original 1950s – 70s posts, now fighting adobe clay and Sacramento Valley heat. We get to the problem the same day in most cases. Our team works on your brand, from Ghost Controls and Mighty Mule residential openers to DoorKing and Elite commercial systems. Call (833) 593-3926. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Citrus Heights Homeowners Call Gate Repair Folsom for Gate Repair
Residents across Citrus Heights call us because we’re gate-only specialists, not a general handyman who occasionally sees a gate. That distinction matters when a 1960s swing gate is binding on a tipped hinge post. We see the post, not just the panel. Rudy Spencer built this company in 2014 on one trade, and every tool, part, and trained hour is dedicated to gates. The gate repair team knows what original construction in this area looks like and what fails first.
Callers from Sunrise Boulevard, Antelope Road, and the neighborhoods off Greenback Lane tell us the same thing: another company adjusted the hinges, and the gate dragged again two months later. We look for the actual cause. Most older side-yard gates in Citrus Heights were set 18 to 24 inches into local adobe clay. When the post tips, the gate drags. No hinge adjustment fixes a moving post. That local knowledge is why homeowners here call us first.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Iron Gate Repair in Citrus Heights
Iron gate repair in Citrus Heights usually means a decorative wrought-iron front gate or a chain-link side gate on original steel posts that have crept out of plumb over 40-plus years. The iron itself is often fine. What fails is what holds it: the hinge post footing, the weld at a hinge, or a latch that no longer lines up because the post has moved in the clay. We cut out the old hardware, re-set the post to proper footing depth, and re-hang the panel. A typical ornamental iron gate hinge or latch repair in Citrus Heights runs $180 to $340, and work is quoted and agreed before any work starts.
Post Re-Set and Realignment
When an iron gate drags on one corner, the panel is usually still square. The post has moved. We expose the footing, pull the post, re-set it deeper, and brace it in fresh concrete. The gate then latches clean without grinding the hardware.
Weld and Rust Repair
Iron gates in Citrus Heights summers bake past 100°F, and winter rain works into hairline cracks. We grind out rust, repair broken welds, and prime and paint the repaired section to match. Repainting a full estate gate is a separate quote, not a surprise add-on.
Sliding Gate Repair in Citrus Heights
Sliding gate repair in Citrus Heights typically involves an old chain-drive or rack-and-pinion gate that has run for decades and now jerks, sticks, or stops halfway. The issue is usually a debris-packed track, worn rollers, or an operator that has outlived its control board. We remove the gate from its travel, clear and realign the track, replace worn rollers, and reset the open and close limits. A track clean, roller replacement, and limit adjustment in Citrus Heights typically runs $220 to $520, depending on gate weight and track condition. The written estimate locks the price before work begins.
Operator Retrofit on Older Slide Gates
Many slide gates around Citrus Heights still run on 1990s control boards that cannot be sourced. When the board fails, we don’t patch it. We retrofit a current operator, new rack and pinion, and working safety photocells. The gate looks the same but now meets current safety and operates smoothly.
Track and Roller Service
A slide gate that shudders or squeals is usually fighting a worn roller or a track out of alignment. We replace the rollers, true the track, and test the open and close cycle. The operator then runs without strain, which extends its life.
Trusted Brands We Service in Citrus Heights
We’re factory-familiar with the systems this area runs on, and that changes how a diagnosis goes. When a Mighty Mule opener on a Citrus Heights chain-link gate fails, our technician thinks in Mighty Mule logic. When a DoorKing slide operator at a small commercial lot off Sunrise Boulevard acts up, we know its control board quirks. We also work extensively on Elite and Ghost Controls systems, from residential swing arms to high-cycle operators. Since we stock common parts locally for Citrus Heights jobs, turnaround is faster than waiting on a mail-order part. From the opener to the operator, we speak the brand’s language.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Citrus Heights Homes
- Tipped hinge posts from shallow adobe clay footings. Original 1960s – 70s posts were set 18 – 24 inches deep, and Clay heaves with winter rain and shrinks in summer heat. A gate that swings fine in April will drag by August.
- Wood panels warped by Sacramento Valley heat. Summer highs over 100°F bake the wood and swell metal hardware, pulling the panel out of square and forcing the latch to miss.
- Winter rain that heaves posts and sticks the gate. The same gate that swung free in October will catch after December storms because the post footing has shifted in saturated clay.
- Obsolete control boards in older slide operators. Boards from the 1990s fail and cannot be sourced, leaving the gate dead. A retrofitted modern operator with current safety photocells is usually the cheaper long-term answer.
Pricing for Gate Repair in Citrus Heights, CA
Gate repair prices in Citrus Heights land in honest, predictable ranges. A hinge or latch repair on an iron gate runs $180 to $340. Sliding gate track and roller service runs $220 to $520. A full operator retrofit on an older slide gate, including rack and pinion and safety photocells, typically runs $1,100 to $2,800, depending on gate length and operator duty cycle. A weld repair on a wrought-iron panel adds $120 to $300, based on the number of cracked joints. These are typical estimates, not exact prices. The written estimate sets the final figure before any work starts. Estimates are free. Call (833) 593-3926 and we’ll come out to look.
We Also Serve Cities Near Citrus Heights
Our crews cover Citrus Heights plus the surrounding Sacramento Valley communities. Homeowners in Antelope, Fair Oaks, Orangevale, and Foothill Farms call us for the same reason Citrus Heights does: a gate specialist who knows older construction and the brands that run on it. If your street is just over the Citrus Heights line, we’ll still be there the same day in most cases.
Serving Citrus Heights, CA – Our Local Coverage Area
We serve Citrus Heights and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Citrus Heights
The hinge post is tipping in the adobe clay. Original side-yard gates in Citrus Heights were often set only 18 to 24 inches deep, and the clay shrinks in summer heat, letting the post lean. The fix is re-setting the post footing, not adjusting the panel. Call (833) 593-3926 and we’ll confirm it on site.
In almost every case, the operator can be retrofitted and the gate stays. We remove the obsolete control board, install a current operator, and add new rack and pinion and safety photocells. The gate looks the same but operates to current safety standards.
UL 325 is the safety standard for automatic gate operators, and it requires entrapment protection such as photocells or contact edges that stop and reverse the gate if something is in the way. An older Citrus Heights gate that lacks working entrapment protection needs it retrofitted when the operator is replaced.
Usually yes, especially if the issue is a tipped post, a broken weld, or a failed latch. The iron itself lasts decades. The repair cost is typically a fraction of replacing the gate, and we’ll be honest if replacement is the cheaper answer.
Winter rain saturates the fence-line soil and heaves the posts. A post that shifted a half inch in the clay changes the gate’s geometry enough to stick. We re-set the post in a deeper footing so it stays put through dry summers and wet winters. We answer 24/7. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
Call (833) 593-3926 for a free estimate on any gate repair in Citrus Heights. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by Rudy Spencer, Owner at Gate Repair Folsom, serving Citrus Heights since 2014.