Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateTrusted Gate Installation for Folsom Homeowners
A new gate in Folsom changes how your property feels from the street and how it functions every day. The right installation keeps vehicles moving, packages off the curb, and kids and pets where they belong. But a gate that’s hung wrong, under-powered, or wired by someone who treats automation as an afterthought becomes a recurring headache. That’s the gap we fill. Our team at Gate Repair Folsom handles gate installation as a dedicated trade, not a side job. We work on your brand of opener and panel, from a Mighty Mule arm on a residential swing to a FAAC slide operator on a commercial driveway. Call (833) 593-3926 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Automatic Gate Installation
Automatic Gate Installation means the gate opens and closes on its own, powered by an operator, triggered by remote, keypad, vehicle sensor, or phone app. You need it when a manual gate starts to feel like a security gap, or when a newer vehicle can’t get in without someone walking out to push it open. We handle the full scope: setting posts, hanging the panel, mounting the operator, and running the low-voltage control wiring so everything talks to everything else. Most Folsom installations run $4,800 to $15,000 depending on panel width, automation type, and site prep. We quote the job first. The written estimate is the price, always.
Operator Selection
We size the operator to the gate’s weight, width, and cycle count. A light vinyl pedestrian gate takes one class of motor. A steel driveway slide takes another entirely.
The wrong operator fails early. The right one runs quietly for years without demanding attention.
Control Wiring
We run proper low-voltage wiring in conduit, never exposed to sprinklers or sun. Loop detectors and safety edges get wired so the gate stops, not crushes.
Every connection is tested with the gate cycling fully before we leave.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Gate Installation Services
Gate Installation Services cover the physical work of putting in a new gate and making sure it operates correctly from day one. You need it when an old gate is past repair, when a new build has an open driveway, or when a property’s access point needs an upgrade to match new security requirements. We handle single and double swing gates, slide gates, and cantilever systems, always matching the hardware to the panel weight and the site’s constraints. Typical Folsom projects land between $4,800 and $15,000, with custom work on the upper end. We measure, quote, then install. Nothing gets started until the written estimate is approved.
New Driveway Openings
If the post locations aren’t set yet, we work with your site plan to place them right. Post depth and concrete strength matter more than most people expect.
We take care of the full footprint so the gate doesn’t sag or drift after a few months of Folsom summer heat.
Replacing Existing Gates
When we remove an old gate, we check the existing posts before reusing them. A new panel hung on a weak post is a warranty problem waiting to happen.
If the posts are solid, we reuse them and save you money. If not, we tell you straight and replace them.
Electric Gate Installation
Electric Gate Installation is the part most general contractors won’t touch: the automation. You need it when a gate must operate by motor rather than muscle, whether that’s a residential driveway or a commercial access point. We install and program the control board, loop detectors, receivers, keypads, and actuators. Power runs, safety edges, and battery backup all get connected and tested. In Folsom, expect $5,500 to $15,000 for a full electric gate installation, depending on the operator brand and how much trenching the site needs. The written estimate sets the final price before any work begins.
Control Boards and Logic
We install boards from LiftMaster, FAAC, BFT, and other brands we know well. Programming is done to match how you actually use the gate, not just default settings.
Auto-close timing, obstruction sensitivity, and remote configuration all get tuned on site.
Safety Systems
Electric gates carry real force. We wire safety edges and vehicle loops so the gate reverses on contact or holds when a car is in its path.
These systems are tested with the gate at full travel, because that’s where problems show up.
Driveway Gate Installation
Driveway Gate Installation puts secure, convenient access at the point where your property meets the street. You need it when the driveway is open, when visitors and delivery drivers wander in, or when you want to control who gets near the house. We install swing and slide gates sized to your driveway’s width and slope, in materials that hold up to Folsom’s sun and dry heat. A typical driveway gate installation runs $4,800 to $14,000. The spread comes from panel size, material, automation, and whether we’re trenching for power or reusing an existing run. The estimate is free and the quoted price is what you pay.
Single vs. Double Swing
A single swing gate needs one motor and less hardware. A double swing covers wider driveways but needs two panels and synchronized operators.
We measure the exact opening and recommend the setup that costs less over time, not just on day one.
Slope and Drainage
A driveway that climbs or falls changes how the gate hangs and how the operator pushes. We account for grade before setting any post.
Water doesn’t pool at the post base when the install is done right. That matters in Folsom’s occasional heavy rain.
Sliding Gate Installation
Sliding Gate Installation is the right move when a driveway is sloped, long, or too wide for swing panels to be practical. You need it when space is tight, when a swing gate would hit cars or landscaping, or when heavy commercial use demands a system that cycles hundreds of times a day. We install cantilever and tracked slide gates with operators matched to the panel’s weight and cycle rate. Sliding installs typically cost $6,000 to $16,000 in Folsom. The higher end covers heavy steel and high-cycle commercial operators. Every job is quoted before work starts.
Cantilever Systems
A cantilever slide gate rides on rollers without a track in the ground. Dirt, gravel, and leaves can’t jam it, which makes it right for Folsom’s exposed driveways.
We set the counterbalance posts to engineering spec. That’s not a guess, and it’s not something we shortcut.
Tracked Sliders
When a cantilever isn’t possible, a bottom track carries the gate. We level the track run so the gate doesn’t bind or chatter.
A smooth start and stop is the sign of a track installed with patience rather than rushed.
Gate Opener Installation
Gate Opener Installation mounts the motor, arm, or slide operator that does the physical work of moving the gate. You need it when the panel is sound but manual, or when an old opener has failed and replacement beats repair. We install openers from Ghost Controls and Mighty Mule for residential work, and FAAC, BFT, and LiftMaster gear for heavier gates. In Folsom, an opener installation typically runs $2,500 to $6,500 when the gate and wiring are already in place. New wiring, trenching, or a new panel pushes the number up. We quote the full scope before we start.
Residential Arms
Ghost Controls and Mighty Mule arms fit a lot of Folsom driveways and they’re serviceable when sized correctly. We check panel weight against the arm’s rating before anything gets bolted down.
An undersized arm wears out fast. We don’t sell that job.
Commercial Operators
FAAC and BFT operators are built for cycle counts that residential gear can’t handle. We install them on apartment entry gates, storage facilities, and small commercial lots.
Mounting, limit setting, and force adjustment are done to the manufacturer’s spec, then tested with live traffic.
Gate Fabrication
Gate Fabrication means building a gate to a specific size, design, or material requirement rather than pulling something standard off a shelf. You need it when your driveway opening doesn’t match stock dimensions, or when the gate has to match an existing fence line or architectural style. We work with local steel fabricators to produce panels that fit the opening exactly and hang square. Custom fabrication in Folsom typically adds $1,500 to $4,500 over the base install, depending on material, height, and design. The estimate itemizes the fabrication cost separately so you see exactly what you’re paying for.
Custom Dimensions
If the opening is 17 feet wide, a 16-foot gate with filler panels looks wrong. We order the panel cut to the actual measurement.
That clean fit is the difference between a gate that looks installed and one that looks built for the spot.
Material Matching
We match steel gates to existing fence color and style, including powder coat finish. The gate shouldn’t look like an afterthought next to the fence line.
We check the sample against the actual panel before it leaves the fabricator.
Brands We Service
We work with LiftMaster openers often on Folsom driveways, and we know where their control boards show age. Faults tend to cluster around the limit switches and accessory wiring, and we diagnose those by behavior, not by swapping parts blindly. FAAC operators appear on a lot of apartment and small commercial gates around Folsom, and we’re familiar with their hydraulic and electromechanical lines, including how their force settings interact with worn rollers.
BFT gear demands correct installation from the start, because its control logic is less forgiving of loose wiring or weak grounds. We handle Mighty Mule units for residential budgets, and we know the arm geometry that keeps them running clean. Whatever brand is on your gate today, we can work with it. And if the opener is beyond saving, we’ll show you what a replacement from a brand you know will cost.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- The gate drags or scrapes on the ground. A hinged post or a settled footing is usually the cause. Continuing to cycle the gate grinds the hardware and eventually burns out the operator.
- The opener runs but the gate barely moves. That’s a slipping drive, low hydraulic fluid, or a failing capacitor, depending on the brand. Running it this way damages the motor and the gearbox.
- The gate reverses for no reason. A dirty safety edge, a misaligned photo eye, or a board that’s losing its settings can cause it. You don’t have to live with a gate that fights you every night.
- You hear grinding, popping, or a loud hum at startup. Each sound points to a different fault, and none of them fix themselves. Early attention keeps a $300 repair from becoming a $3,000 replacement.
- The posts are leaning or the concrete is cracking. Gates are heavy and they act as a sail in the wind. A post that’s moving means the whole system is taking stress it wasn’t built for.
Our Process, Step by Step
- 1
Measure and assess. We check the opening width, the driveway slope, the panel weight, and the existing structure. We also ask how many times a day the gate will cycle, because that changes the operator class we recommend.
- 2
Written estimate. You get a detailed price for the gate, the operator, the posts, the wiring, and the removal of any old hardware. Nothing starts until you approve the number in writing.
- 3
Site prep and footing work. Posts go to the depth the panel weight and soil require. Concrete cures before we hang the gate, so it doesn’t settle later and drag the hinge line out of square.
- 4
Installation and wiring. The panel goes up, the operator gets mounted, and the control wiring lands in conduit. Every connection is tightened, labeled, and tested before the gate cycles once under power.
- 5
Final testing and walk-through. We run the gate through full cycles, test the safety edges and photo eyes, and show you how the remotes and keypad work. You get the manual and a clear explanation of what was installed.
How Much Does Gate Installation Cost in Folsom?
A typical gate installation in Folsom runs $4,800 to $15,000. The wide range comes from real variables: a single swing gate with a Mighty Mule opener sits at the lower end, while a cantilever slide gate with a FAAC commercial operator and custom steel fabrication lands at the top. A gate opener installation on an existing, sound panel is the only common job that dips under $4,000, usually $2,500 to $6,500 depending on the brand and whether new wiring is pulled.
What moves the price: panel width and material, swing versus slide, operator class, how much trenching the power run needs, and whether the old gate and posts must come out. The best way to avoid overpaying is to get a quote that separates materials, labor, and automation. A bundled number hides where the money goes. Our free estimate lists each part of the job, and the price we quote is the price on the invoice, not a starting point for surprises.
Our Service Area Near Folsom
We install gates throughout Folsom and the surrounding communities. If you’re in Roseville, Carmichael, Citrus Heights, Rancho Cordova, Rocklin, El Dorado Hills, Orangevale, Antelope, North Highlands, Fair Oaks, or Foothill Farms, we can usually reach your property the same day for a repair, and we schedule installations on a route-planning basis that keeps our travel time off your invoice.
Serving Folsom, CA – Our Local Coverage Area
We serve Folsom and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Gate Installation in Folsom
Gate installation is the complete process of placing and securing a new gate, including posts, panel, operator, and wiring. In Folsom it often includes removing an old gate and checking whether existing posts can be reused. We handle the entire job, from first measurement to final safety tests.
Most Folsom gate installations take one to three days from start to finish. Concrete curing time adds a day when new posts are set, since the gate can’t be hung until the footing is solid. The specific timeline is in your written estimate before we begin.
A typical installation runs $4,800 to $15,000. The price depends on panel width, material, automation type, and site work. Call (833) 593-3926 for an exact quote. Estimates are free and the written number is the price you pay.
Yes, we install and repair LiftMaster and Mighty Mule openers regularly. We also work with FAAC, BFT, and the other brands listed on our site. We’ll match the opener to your gate’s weight and how many times a day it cycles.
Installations are scheduled, not dispatched like repairs. We answer 24/7 and fast dispatch runs from 7am to 7pm, Sunday through Friday, for repair calls. A new gate installation gets a scheduled date and a firm window, with the written estimate in your hand first.
We stand behind our workmanship and pass through the manufacturer’s warranty on the operator and hardware. If something isn’t right, call us and we’ll make it right. The warranty terms are included in your written estimate.
Clear the driveway of vehicles and anything near the gate posts. If the power source is far from the gate, think about the route you’d prefer for new conduit. We’ll handle the rest, including removal of the old gate and cleanup.
Schedule Your Gate Installation Service in Folsom Today
You’ll get a straight answer about what your gate should cost and how long it’ll take. Call (833) 593-3926 and we’ll schedule a free on-site estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by Rudy Spencer, Owner at Gate Repair Folsom, serving Folsom since 2014.