Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in North Highlands, CA
Gate Installation in North Highlands usually means reviving or replacing hardware on a 1950s-to-1970s tract home along the Highway 160 corridor, where the original chain-link and wrought-iron gates have spent decades in hot, dry summers and wet Sacramento Valley winters. We’re gate-only specialists, so we work on your brand whether it’s a Viking swing arm, a Ghost Controls opener, or an old manual gate with rusted hinges and a post that’s drifted out of line. Call (833) 593-3926 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why North Highlands Homes Are Different
Most of North Highlands was built as single-story tract housing between the 1950s and 1970s, and the gates that came with those homes are still hanging in a lot of cases. That’s not a compliment to the hardware. It means we routinely see thin-gauge steel frames rusted through at the welds, galvanized chain-link that’s still serviceable but pulling away from posts set in alkaline Sacramento Valley soil, and wood gates that have been shaved, shimmed, and improvised so many times that the original dimensions are long gone.
The climate does something specific here. Summers run 90 to 100°F for long stretches, which dries out wood and makes metal expand against itself. Then the first real rains of winter hit, the clay soil shifts, and suddenly a gate that latched fine in August won’t close by November. We get calls every fall from homeowners in North Highlands who find their gate swollen shut or the latch sitting half an inch above the strike plate. The fix is usually re-hanging the gate, re-aligning the posts, or trimming the bottom edge so it clears the new ground level.
This market is heavily owner-occupied and cost-conscious, so the work favors repairs that extend the life of existing gates rather than ripping everything out. When replacement is the right call, we quote it plainly and let the written estimate set the final price, agreed before any work starts.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main North Highlands Services
Homeowners in North Highlands call us most about two things: a gate that won’t open or close properly, and an electric opener that’s stopped responding. Both are our core work, and both have pages specific to this city.
Gate Repair in North Highlands
Older North Highlands gates fail in predictable ways: posts lean in clay soil, hinges rust at the pin and bind, and latches fall out of alignment after years of use. We re-hang sagging gates, weld or replace rusted frame sections, and rebuild latch hardware so the gate stays closed on its own. If you’re dealing with a gate that drags on the ground or won’t latch, Gate Repair in North Highlands has the full breakdown of what we check and what it typically costs.
Electric Gate Repair in North Highlands
Electric gates add control boards, loop detectors, keypads, and actuators to the mix, and those components fail differently than mechanical hardware. We diagnose by brand logic across LiftMaster, Viking, Ghost Controls, DoorKing, Elite, and others, so we’re not spending the first hour guessing at wiring. When an opener hums but won’t move, or the keypad stopped accepting codes, Electric Gate Repair in North Highlands explains what’s involved and what the repair typically runs here.
Gate Installation in North Highlands
Gate Installation in North Highlands is rarely about a blank slate. Most jobs start with an old gate that’s served since the Ford or Carter administration and now has a post that’s rotted below the soil line, a frame that’s rusted through, or a swing that’s never been right since the driveway settled. North Highlands clay soil shifts with the seasons, so post depth and footing quality matter more here than in places with rockier ground. We remove the old hardware, set posts to proper footing depth, and hang a gate built for the actual opening, not one forced to fit. You can read more about the full scope on our Gate Installation page.
Automatic Gate Installation
Signs you need it
You’re getting out of the car to open the gate every time, or the current opener is old enough that parts are no longer available for it.
What it costs in North Highlands
In North Highlands, automatic gate installation typically runs $2,800 – $5,800, with the written estimate setting the final price before work begins.
How we do it
We measure the gate and opening, check the swing or slide path for obstructions, mount the operator and arm to the gate and post, run the power and control wiring, then set travel limits and safety features so the gate stops and reverses correctly.
Driveway Gate Installation
Signs you need it
The existing driveway gate is dragging, the post has pulled out of line, or you want a gate that actually secures the driveway instead of just marking it.
What it costs in North Highlands
A new driveway gate in North Highlands typically falls between $1,800 and $4,200, and the written estimate is what you’ll pay, agreed before work starts.
How we do it
We remove the old gate and hardware, dig and set posts to proper footing depth, hang the new gate to swing or slide cleanly, and install the latch and any operator you’ve chosen.
What Gate Installation Costs in North Highlands
| Item | Typical range in North Highlands |
|---|---|
| Manual driveway gate, installed | $1,800 – $4,200 |
| Automatic gate opener and operator, installed | $2,800 – $5,800 |
| Gate hardware (hinges, latch, wheels, posts reset) | $250 – $900 |
How long does gate installation take in North Highlands?
Most manual gate replacements are done in a day. Automatic gate installations usually take a full day for the mechanical work plus a return visit for final electrical connection and adjustment, depending on the power run and the operator.
Do I need a permit for a gate in North Highlands?
Most gate replacements on existing posts don’t trigger a permit, but new driveway gates with operators sometimes do depending on setback and height rules. Ask Sacramento County’s building department for your specific property; we can tell you what we’ve seen on similar North Highlands jobs.
Brands We Service in North Highlands
We work on Viking, Ghost Controls, DoorKing, and Elite systems throughout North Highlands, along with LiftMaster, FAAC, BFT, Linear, and Mighty Mule. Because we’re gate-only specialists, we keep common control boards, actuators, photo eyes, and receiver parts on hand or available same-day from local suppliers. In most cases, a North Highlands repair means one trip to diagnose, not one to diagnose and another to come back with parts. See our brands page for the full list of what we service.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in North Highlands, CA
| Service | Typical range in North Highlands |
|---|---|
| Gate hardware repair (hinges, latch, wheels, posts reset) | $250 – $900 |
| Manual gate replacement | $1,800 – $4,200 |
| Automatic gate opener installation | $2,800 – $5,800 |
| Electric gate control board replacement | $500 – $1,300 |
| Electric gate actuator repair or replacement | $650 – $1,800 |
| Keypad, receiver, or loop detector replacement | $300 – $800 |
| Gate operator full replacement | $1,500 – $3,200 |
| Photo eye or safety edge replacement | $250 – $600 |
What pushes a North Highlands gate job higher is usually the age of the original install: posts that have shifted in clay soil need resetting, wiring that was never in conduit needs re-running, and the first soaking rains after a dry summer reveal gates that need ground clearance work before the new hardware goes on. Every price above is an estimate for planning; your written estimate is the number, and we agree on it before any work starts.
Neighborhoods We Serve in North Highlands
We cover all of North Highlands, from the older tract streets west of Watt Avenue to the mobile home and manufactured home communities near the Roseville Road corridor and the neighborhoods bordering Foothill Farms. Calls in the 95660 area usually get a technician out the same day, Sunday through Friday.
- North Highlands proper, west of Watt Avenue
- Areas along Roseville Road and Longview Drive
- Streets near the Highway 160 and Don Julio Boulevard corridors
- Neighborhoods adjacent to Foothill Farms
- Manufactured home communities in central North Highlands
Service Area – Cities Near North Highlands
Our North Highlands work often takes us into the communities next door and across the wider Sacramento Valley. We also serve Foothill Farms, CA, Del Paso Park, CA, Antelope, CA, and Carmichael, CA with the same gate-only focus and brand coverage we bring to North Highlands. If you’re right on the line between two of these areas, call and we’ll confirm the dispatch time for your street.
Serving North Highlands, CA – Our Local Coverage Area
We serve North Highlands and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in North Highlands
We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. Most North Highlands repair calls get a technician out the same day; a call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Call (833) 593-3926 for the next available time.
Yes. We handle residential systems like Ghost Controls and Mighty Mule and professional-grade commercial operators from FAAC, BFT, and DoorKing. The same technician who re-hangs a homeowner’s rusty swing gate is equally at home with a high-cycle commercial slide system.
Yes. Estimates are free, and the written estimate is the price you’ll pay, agreed before any work starts. No surprise invoice at the end. Call (833) 593-3926 and we’ll schedule a time to look at the gate and give you a firm number.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within the hour.
- 4You approve before work beginsNothing starts until you say go.
What North Highlands Customers Say
"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
- Brandon Lin"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
- Sofia Torres"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
- Laura Bennett