Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Roseville, CA
Most gate work in Roseville comes down to two jobs: rehabbing a 25-to-50-year-old suburban side-yard or driveway gate that has sagged out of square, or installing a new gate and operator on a newer HOA-governed lot in West Roseville. The climate here, hot dry summers followed by winter rain on expansive clay soil, moves posts and swells wood in ways that a generic handyman often misreads. We handle gate installation as our primary service because Roseville homeowners usually discover that a gate too far gone to repair cleanly is better replaced with hardware and posts built for this specific soil and swing clearance. Call (833) 593-3926 for a free estimate.
Why Roseville Homes Are Different
Roseville’s 95661 and 95678 core is full of 1960s through 1990s planned-community tract homes. Sunrise, Foothill/Diamond Oaks, Oakmont, and Sierra Gardens neighborhoods carry the original wood and early metal driveway and side-yard gates, and many of them now ride on posts that shifted years ago. The region’s expansive clay soils expand with winter rain and shrink through the dry summer, and as homeowners irrigate planting beds beside gates, the cycle repeats. Add 100°F-plus summers that dry and warp wood, and the classic result is a gate that swung fine in August dragging on the concrete by January.
In 95747, around the Fiddyment corridor and newer West Roseville subdivisions, the job changes. These lots are denser, the gates are more often metal, and the repair or replacement has to match an association-approved style and swing spec. We read HOA requirements carefully before proposing work, because a gate that closes but violates a design standard is not a finished job in Roseville.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Roseville Services
When a Roseville homeowner or property manager calls us, the conversation starts with one of two problems. Here is what each one involves here.
Gate Repair in Roseville
Most Roseville gate repairs are about age and soil movement rather than accident damage. A wood gate that has dried, warped, and pulled its hinges out of an original post needs more than a fresh screw pack: the post has to be reset or replaced, the frame re-squared, and the swing clearance adjusted for how the clay soil has shifted. We handle sagging panels, failed hinges, dragging gates, and latch alignment on the older tract-home gates and the newer metal side-yard gates alike. For the full scope of what we fix, see Gate Repair in Roseville.
Electric Gate Repair in Roseville
Automated gates fail differently in Roseville than in coastal California, and most failures trace to the operator, the control board, or a loop detector rather than the gate panel itself. A gate that opens partway and reverses, a keypad that stopped responding, or an opener that hums but does not move is an electrical diagnosis. We open the operator, test the limits and safety inputs, and replace or repair the failed component. For a full breakdown of what electric gate repair covers in Roseville, including brand-specific diagnosis, see Electric Gate Repair in Roseville.
Gate Installation in Roseville
Gate installation in Roseville splits into two distinct jobs. The first is replacing an original tract-home gate that has outlived its posts: the wood is split, the post has heaved, and patching it again costs more than starting square. The second is a new automatic gate on a newer 95747 lot, where the HOA has already set the style, the swing direction, and often the color. Both jobs depend on posts set to proper footing depth for expansive clay, because a gate installed on a shallow post in this soil will be out of square within two winters. We measure, quote, and install the whole system, and we work with your association’s spec from the first drawing to the final swing test. See our Gate Installation page for the full process.
Automatic Gate Installation
Signs you need it
You want to open and close the gate from the car or the house rather than walking to it, or an existing automatic gate has failed and the operator is beyond repair.
What it costs in Roseville
A new automatic gate system in Roseville typically lands between $2,800 and $11,000 depending on gate size, operator type, and whether new posts and electrical are needed.
How we do it
We set posts to full footing depth, hang the gate, mount the operator, run the power and safety edges, then program and test the full open-close cycle with you.
Driveway Gate Installation
Signs you need it
Your property needs controlled vehicle entry, or the existing driveway gate is rusted, sagging, or too narrow for the vehicles you now drive.
What it costs in Roseville
Driveway gate installation in Roseville typically ranges from $3,000 to $12,000 when it includes a new gate, posts, operator, and the electrical run.
How we do it
We work from your HOA spec or property layout, set the posts, fit the gate and hardware, and install and program the operator so the gate stops and reverses safely under load.
What Gate Installation Costs in Roseville
| Item | Typical range in Roseville |
|---|---|
| Manual gate and post replacement | $700 – $2,500 |
| Automatic gate with operator | $2,800 – $11,000 |
| Driveway gate with operator and electrical | $3,000 – $12,000 |
Do I need a permit to install a gate in Roseville?
Most Roseville gate installations need city approval for setback and height, and HOA-governed lots add their own design review. We help you confirm what the city and association require before any work starts, and your written estimate includes the permitted scope.
How long does a gate installation take in Roseville?
A simple manual gate replacement is often one day. An automatic driveway gate with new posts, electrical, and operator typically runs two to three days, depending on the digging and the HOA inspection schedule.
Brands We Service in Roseville
Our Roseville techs diagnose by brand logic, not guesswork. We work on Mighty Mule and LiftMaster systems for residential jobs, and FAAC and BFT operators for commercial and HOA-grade installations. See our brands for the full coverage and the most common parts we keep on the truck.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Roseville, CA
| Service | Typical range in Roseville |
|---|---|
| Hinge and latch repair | $95 – $240 |
| Wood gate realignment with post reset | $250 – $600 |
| Metal gate weld and realign | $180 – $475 |
| Operator troubleshooting and repair | $150 – $550 |
| Control board replacement | $350 – $900 |
| Loop detector replacement | $250 – $600 |
| Manual gate and post replacement | $700 – $2,500 |
| Automatic gate with operator | $2,800 – $11,000 |
| Driveway gate with operator and electrical | $3,000 – $12,000 |
| Full gate and operator replacement | $2,500 – $9,000 |
Roseville prices shift with clay-soil digging conditions, HOA compliance work, and the distance from the electrical panel to the gate posts. Every job is quoted and agreed before work starts, with a written estimate that sets the final price.
Neighborhoods We Serve in Roseville
We cover all of Roseville, from the older tract-home blocks to the newest West Roseville subdivisions. Most calls get same-day diagnosis, and replacement parts are ordered the same afternoon when they are not already on the truck.
- Sunrise
- Foothill/Diamond Oaks
- Oakmont
- Sierra Gardens
- West Roseville (95747)
Service Area – Cities Near Roseville
Beyond Roseville, we regularly work in the surrounding Sacramento Valley communities. That includes Rocklin, CA, Citrus Heights, CA, Antelope, CA, and Granite Bay, CA. If your gate is on the edge of Roseville, call and we will confirm coverage and the next available dispatch window.
Serving Roseville, CA – Our Local Coverage Area
We serve Roseville and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Roseville
Yes. Many West Roseville and 95747 properties carry association design rules for gate style, height, color, and swing direction. We work from the HOA spec from the first measure to the final inspection so the gate meets both function and approval.
We answer the phone at (833) 593-3926 and send a technician with fast dispatch from 7am to 7pm, Sunday through Friday. Most Roseville gate failures are diagnosed the day you call, and many repairs are completed on that first visit.
Yes, estimates are free. We measure the gate, check the posts and operator, and give you a written price before any work begins. The number on that estimate is the number you pay unless you add scope afterwards.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within the hour.
- 4You approve before work beginsNothing starts until you say go.
What Roseville Customers Say
"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
- David Wong"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
- Adam Miller"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
- Brandon Lin